MTEC offers short, specialized trainings covering a variety of HVAC systems, technologies, and service procedures. These courses provide opportunities to strengthen technical skills, explore new equipment and techniques, and gain hands-on experience in specific areas of the trade.
Our workshops are offered periodically, with topics and schedules determined by industry needs and interest.
Select a workshop to explore the training topics, course requirements, and upcoming availability.
Build on your Basic Electricity knowledge with this hands-on, two-day course. Learn to confidently use a multimeter, ensuring proper tester ratings and testing procedures. Dive into reading and interpreting electrical diagrams, including component and ladder diagrams, using materials from the ESCO Institute.
Note: A multimeter is required. Bring your own or purchase one during registration.
| Class Name | Starts | Ends | Cost |
|---|---|---|---|
| Electrical Diagrams & Component Testing | May 19, 2027 | May 20, 2027 | Member: $500.00; Non-Member: $700.00 |
Master the essentials of low voltage wiring and Wi-Fi thermostat integration. Learn when and how to use a common wire, adapt circuits, identify controls compatible with powered thermostats, and add power sources for Wi-Fi thermostats. The course also covers thermostat installation, setup, and cycle rate optimization, ensuring seamless integration with system transformers and relays.
Perfect for technicians looking to enhance their wiring and smart thermostat skills!
| Class Name | Starts | Ends | Cost |
|---|---|---|---|
| Low Voltage Wiring & WIFI Thermostats | May 26, 2027 | Member: $300.00; Non-Member: $450.00 |
Expand your skills in servicing and repairing mini split heat pumps (MSHP). With the growing demand for MSHP maintenance, this course focuses on diagnosing issues, performing repairs, and conducting proper cleaning and mold removal. Participants will engage in hands-on lab work, troubleshooting live equipment using AC Service Tech training materials, videos, and workbooks.
This is not an entry level course. Technicians should have a solid understanding of the Installation and Operation of MSHP before attending this class.
No upcoming session is scheduled. Call (207) 729-5298 for upcoming dates.
Learn the regulations, safety procedures, and proper handling practices for flammable refrigerants, including A2L and hydrocarbon refrigerants, with an emphasis on safe handling and servicing practices.
No upcoming session is scheduled. Call (207) 729-5298 for upcoming dates.
Learn airflow calculations, duct sizing, and design principles for ducted heat pump systems. Training covers converting BTUs to CFM, sizing supply and return air ducts, and designing effective airflow strategies for dual-fuel and multi-zone systems, with an emphasis on meeting whole-home heat pump installation requirements.
Participants receive a copy of the ACCA Manual D duct design guide.
| Class Name | Starts | Ends | Cost |
|---|---|---|---|
| Airflow & Duct Design | June 2, 2027 | Member: $300.00; Non-Member: $450.00 |
Learn the fundamentals of hydronic heating systems, including electrical controls, wiring, zoning, piping strategies, and system preparation. Training covers control components, zoning with valves and circulator pumps, piping configurations for oil-fired and gas-condensing boilers, air removal, water treatment, and system flushing.
Participants receive manufacturer reference materials and technical guides to support installation, service, and maintenance.
No upcoming session is scheduled. Call (207) 729-5298 for upcoming dates.
Learn manual heat loss calculations and HVAC system design principles for residential heating and cooling applications. Training covers evaluating building construction, calculating heating and cooling loads, selecting properly sized equipment, and designing hot water, forced-air, and heat pump systems. Students also learn to convert heat loss calculations into airflow requirements and apply proper duct sizing methods.
No upcoming session is scheduled. Call (207) 729-5298 for upcoming dates.
Learn the installation, operation, and servicing of liquid propane pumps, vaporizers, meters, and bulk plant piping systems through hands-on training in MTEC’s liquid propane lab. Training covers flaring burner setup, system startup, troubleshooting, and applicable NFPA codes and requirements for bulk plants and dispensers.
No upcoming session is scheduled. Call (207) 729-5298 for upcoming dates.
Not all of MTEC’s technical workshops are offered on a regular schedule. We periodically revisit past courses and introduce new training topics based on industry needs and student interest.
If there’s a workshop you’d like to attend, let us know! Your interest helps us determine which courses to offer in the future. Contact MTEC to discuss your training needs.

We are here to assist you and answer all your questions